Water heater install in Brandy Station

1.    Removal of Existing Equipment
    •    Remove existing 40-gallon natural gas standard vent water heater.
    •    Remove existing service valve and drain pan.
    •    Properly disconnect gas, water, and vent connections.
    •    Remove debris and dispose of materials in accordance with local regulations.
    2.    Installation of New Equipment
    •    Furnish and install new State Light Duty Commercial Grade 40-gallon natural gas standard vent water heater.
    •    Install new water heater drain pan.
    •    Install new thermal expansion tank (sized and installed to current plumbing code).
    •    Install new service valve.
    •    Reconnect to existing gas line, venting, and water lines (reuse existing connections where code-compliant).
    •    Secure and properly strap water heater per code requirements.
    3.    Startup & Testing
    •    Fill and purge system.
    •    Set water temperature to 120°F.
    •    Test gas connections, water connections, and venting for proper operation.
    •    Inspect and test for leaks.
    •    Verify proper ignition and heating cycle.