Water Treatment Products Before & After Photos

Before- Older Water treatment System 

After – Newly updated Watercare system

The customer only had a small filtration system for sediment

After- Complete whole house filtration system

Gordon B. had JR Snider install a water softener in their home.

The customer purchased a newer home that was on city water. The water had a lot of chlorine and hard water issues.

We installed a new WaterCare Red Resin Softener to take care of the hardness problem and a "ONE" filter with Carbon to help with the chlorine removal. Now their water will taste better and will stop leaving hardness stains!

Both units were installed to the left of the pressure tank. We ran a new 1” cpvc water line from the pressure tank and through both units, reconnecting it onto the existing 3/4” copper water line. Additionally, we ran a new 3/4” cpvc backwash line to the laundry standpipe in the next room.

After completing the installation, we let the glue dry for 45 minutes and turned the water back on to check for any leaks. Fortunately, no leaks were found. We then proceeded to program both units, backwash and rinse them thoroughly, and cycle them to ensure they are working properly. We introduced chlorine through the air cat, drained and refilled the water heater, and chlorinated the entire house. Lastly, we backwashed and rinsed the air cat and allowed it to draw air for 15 minutes. We ran chlorine off and tested the water, and we are pleased to inform you that everything is now working properly.